StarTech.com RACKCONV1701 manual Introduction, Packaging Contents, Hardware Installation

Page 4

Introduction

Packaging Contents

•1U LCD Rack Console Drawer

•VGA cable

•USB cable

•Mounting Rails - Set

•Power Adapter

•Power Cord

Installation

Hardware Installation

Hardware Kit Contents

Side Rails with front and rear brackets (2)

Screw kit

(Used to attach Rail Mount to Console body)

•Please check that all packaging contents are present before installation. Make sure that nothing was damaged and/or lost during shipping process. If you encounter any problem, please contact your dealer.

•Before installation, make sure all peripherals and computer have been turned off.

•The cabinet depth range must be in 508 ~ 809 mm.

Instruction Manual

Image 4

Contents 1U 17”/19” Rackmount LCD Console - USB - Value Series RACKCONV1701 RKCONV1701xx RACKCONV1901DE Bedienungsanleitung - de.startech.com FR Guide de lutilisateur - fr.startech.comFCC Compliance Statement Table of Contents InstallationHow to Use SpecificationsInstallation Packaging ContentsHardware Installation Hardware Kit ContentsMounting the console 4. Install the remaining rail, repeating Steps 6. Install two screws on each side of the rear console7. Installation is now complete 3. Tighten the rear screws that were loosened in StepHow to Use Connecting the ConsoleConfiguring Display Settings Turning on the ConsoleTesting the Console Panel Controls and OSD Functions Auto tuneBrightness ContrastColor PositionTo adjust the position of the OSD To set CIE coordinates at 9300K colorPower Indicator LanguageRecall ExitSpecifications Dimension Net WeightChassis ConstructionRACKCONV1701 Dimensions RACKCONV1901 Dimensions Technical Support Warranty InformationLimitation of Liability Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise