StarTech.com RACKCONV1901, RACKCONV1701 manual Mounting the console

Page 5

Mounting the console

1.Adjust the sliding rail until the screw underneath is visible. Loosen (do not release) the two rear screws then adjust the rear bracket to fit the depth of your rack:

2.Install the rail into the rack by attaching them to the front/rear posts using the appropriate screws and nuts for your rack (not included):

Instruction Manual

Image 5

Contents RACKCONV1701 RKCONV1701xx RACKCONV1901 1U 17”/19” Rackmount LCD Console - USB - Value SeriesDE Bedienungsanleitung - de.startech.com FR Guide de lutilisateur - fr.startech.comFCC Compliance Statement Installation Table of ContentsHow to Use SpecificationsPackaging Contents InstallationHardware Installation Hardware Kit ContentsMounting the console 6. Install two screws on each side of the rear console 4. Install the remaining rail, repeating Steps7. Installation is now complete 3. Tighten the rear screws that were loosened in StepConnecting the Console How to UseConfiguring Display Settings Turning on the ConsoleTesting the Console Auto tune Panel Controls and OSD FunctionsBrightness ContrastPosition ColorTo adjust the position of the OSD To set CIE coordinates at 9300K colorLanguage Power IndicatorRecall ExitSpecifications Net Weight DimensionChassis ConstructionRACKCONV1701 Dimensions RACKCONV1901 Dimensions Limitation of Liability Warranty InformationTechnical Support Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise