Instruction Manual
Network
The Network dialog is used to specify the SV1107IPEXT’s network envi- ronment.
Access Ports
If a firewall is being used, the Administrator can specify (in the firewall set up) the port numbers that it will allow. When connecting to the SV1107IPEXT, users must specify the port number as part of the IP Address.
If an invalid port number (or no port num- ber) is specified, the SV1107IPEXT will not be found. (i.e 192.168.0.60 / 9000 for the Windows client, 192.168.0.60/9002 for the Java client.)
Please Note:
1.If there is no firewall (on an Intranet, for example), these numbers will not have any effect.
2.The access ports cannot have the same value. A different value must be set for each one.
Explanations of the fields are given in the table below:
Field | Explanation | |
|
| |
| This is the port number that must be specified when | |
Program | connecting from the Administrator and Windows Client. Valid | |
| entries are between 1024 | |
|
| |
Java | This is the port number used for Java connections. Valid | |
entries are between 1 - 65535 | ||
| ||
|
|
17