Instruction Manual
Filtering
To enable IP and/or MAC filtering, place a checkmark in the IP Filter Enable and/or MAC Filter Enable checkbox. There is a maximum of 100 filters allowed for each option.
•If the include button is checked, all the addresses within the filter range are allowed access to the SV1107IPEXT. Addresses not specified within the filter will be denied access.
•If the exclude button is checked, all the addresses within the filter range are denied access to the SV1107IPEXT. Addresses not specified within the filter will be allowed access.
User Station Filtering – IP Addresses
To add an IP Address filter:
1.Click Add. A dialog box similar to the one below appears:
2.Specify the filter address in the dialog box, then click OK. A second dialog box, similar to the one below, appears:
3.To filter a single IP address, key in the same address as the start IP Address. To filter a continuous range of addresses, key in the end number of the range.
4.After filling in the address, click OK.
5.Repeat these steps for any additional IP addresses you wish to filter.
20