StarTech.com CABCONS1716I manual Hardware Guide, Front Panel Functions, KVM Control and Status

Hardware Guide

Front Panel Functions

1 2 3 4 10

5

6

7 8 9

KVM Control and Status:

(This section is effective only when a KVM switch module is connected.)

1.Computer Selection Pad - Press one of these pushbuttons to select a computer. For 16 port models, 1-8 represent the lower 8 ports, while A-H indicates the higher 8 ports. Port 1 and A share the same pushbutton; if port 1 is already selected, tap its pushbutton to select port A. If port 1 is not selected, press and hold pushbutton 1 for two seconds to select port A.

2.Selected Computer Indicator - One of the indicators turns red when a corresponding computer is selected by pushbuttons, hotkey or OSD menu.

3.Local Console in Operation - When a computer is accessed through the console, this will illuminate green.

4.Remote Console in Operation - This will illuminate green when a computer is accessed by another set of keyboard/mouse/monitor connected to the Remote console when the KVM Switch Function Module is a 2-console KVM.

LCD Panel Control:

5.LCD Panel Menu - These buttons invoke the OSD menu for the LCD panel and acts as menu selection/navigation

6.LCD Panel Adjustment - Lets you adjust settings for the LCD panel.

Instruction Manual

9