Teac MC-DX25 owner manual Programmed Playback, STOP, FUNCTION, Power

Programmed Playback

FUNCTION

MEMORY/

CLOCK SET

Up to 64 tracks can be programmed in the desired order.

Shuffle and Repeat functions don’t work during programmed playback.

1Press the FUNCTION button to select ‘CD’.

2Press the MEMORY button.

‘MEMORY’ lights up in the display.

<To cancel the program mode, press the Stop button (H).

3Press the Skip button (.or/) repeatedly to select a folder of a MP3 disc, then press the MEMORY button.

<MP3 tracks recorded out of folders are in the ‘01’ (ROOT) folder.

<Skip this step when playing a CD.

4Press the Skip button (.or/) repeatedly to select a track, then press the MEMORY button.

The track is programmed, and ‘P-02’ is displayed.

<Repeat steps 3 and 4 to program more tracks.

<You can program up to 64 tracks.

5When the selection of track numbers is completed, press the Play/Pause button (G/J) to start program playback.

<When the playback of all the programmed tracks has finished, or if one of the following buttons is pressed, the MEMORY indicator will go off and the program mode will be cancelled:

STOP, FUNCTION, POWER

The program is retained in memory until the OPEN/CLOSE button is pressed or the power is interrupted. You can return to the programmed playback by pressing the MEMORY button and the Play/Pause button (G/J). (If another source was selected, select the CD mode by pressing the FUNCTION button beforehand.)

12