Teac MC-DX25 Wall Mounting, Subwoofer, AC Power Cord, Power Switch, To hook on the wall

Page 5

CSubwoofer

Make the connection between the ‘TO SUBWOOFER’ and ‘FROM MAIN’ sockets using the supplied cable.

DAUX IN

You can connect a DVD player, VCR etc. to this unit. Connect the component with RCA pin cords.

Make sure to connect the white plug to the white jacks (Left) and the red plug to the red jacks (Right).

DVD, TV, etc.

LINE OUT

R L

ESPEAKERS

Connect the left speaker’s plug to L, and the right speaker’s plug to R.

<When using speakers other than those supplied with the system, the impedance should be 3 ohms or more.

<Do not connect anything other than speakers to these terminals.

FAC Power Cord

Plug this AC power cord into an AC wall socket.

GPower Switch

Use this switch to turn the system on or off.

The main unit is powered via the subwoofer. You need to first turn this switch on.

Wall Mounting

You can mount the main unit and/or the left and right speakers on a wall.

Precautions

<Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the main unit and the speakers too far from the subwoofer.

<Drill holes into solid wall support, such as wooden frame or concrete wall.

<TEAC supplies these brackets as a convenience to the product owner. Consult your local building codes and exercise all necessary caution when mounting these brackets. If you are unsure how to use the supplied brackets, consult with a local tradesmen or building supply expert.

To hook on the wall

1Use the supplied template to determine drilling points.

2Secure the brackets on the wall using the supplied screws.

<As a convenience, a set of tapered plastic anchors is supplied. If you chose to use these anchors, drill a pilot hole using either a 6mm drill bit then tap the anchor into the pilot hole.

Only use these anchors if they are appropriate for the materials onto which the unit is to be mounted. Consult your local hardware store if you are uncertain.

Note:

Before going on, make connections between the main unit and the speakers by referring to page 4-5.

3 Hang the main unit and/or the speakers to the mounting tabs.

Main Unit

Speaker

3

3

2

2

5

Image 5
Contents MC-DX25 Before Use ContentsDiscs that can be played on this unit DiscsMP3 compatibility FM Outdoor Antenna AM loop antennaFM antenna Power Switch AC Power CordWall Mounting SubwooferNames of Each Control Battery Installation Remote Control UnitSleep Timer HeadphonesBasic Operation MutingWhen a MP3 disc is loaded When a CD is loadedListening to CD/MP3 Press the OPEN/CLOSE button to close the CD doorTo stop playback To suspend playback temporarily pause modeTo skip to the next or a previous track Search for a part of a trackSearch for a track in a folder Search Mode MP3 onlySearch for a name of track Programmed Playback STOP, FUNCTION, PowerTo add a track to the end of the program To check the programmed orderTo overwrite the program To clear programShuffle Playback Repeat PlaybackRepeat one track Repeat all the tracksSTEREO/MONO button Listening to the RadioIf the reception is poor StereoWithin 5 seconds, press the Memory button Preset TuningPS Programme Service name How to select preset stationsPress the RDS button PTY Programme TypeSelect FM by pressing the FM/AM button Press the PTY button RDS PTY SearchSetting the Clock Timer Prepare the source To turn on or off the timerPress the Power button to turn the unit off standby Troubleshooting Speaker SpecificationsSubwoofer GeneralTeac Corporation