Q-Logic FIRMWARE VERSION 7.4 manual A1003.0039 Merge failed, total zone limit would be exceeded

3 – Event Messages Alarm Events

S

(A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)

Meaning:	A fabric merge failed because the total number of zones in zone
	sets exceeds the zoning database limit.
Action:	Remove zones either from the local switch or the remote switch so
	that the combined sum is less than the zones-in-zone sets limit.

(A1003.0039) (Merge failed, total zone limit would be exceeded.)

Meaning:	A fabric merge failed because the total number of zones exceeds
	the zoning database limit.
Action:	Remove zones either from the local switch or the remote switch so
	that the combined sum is less than maximum zone limit.

(A1003.003A) (Zone Merge conflict for ZoneSet zone_set_name (Zone mismatch for zone= zone_name, check type or members), ISOLATING)

Meaning:	A fabric merge failed because two zones of the same name in two
	zone sets of the same name have different membership.
Action:	Reconcile the membership in the two zones so that they are the
	same.

(A1003.003B) (Incomplete merge request sequence received, unable to process request.)

Meaning:	A remote switch sent a merge request that was not understood.
Action:	Check the remote switch for configuration errors or equipment
	malfunction.

(A1003.003C) (Incompatible Zoning mode, Isolating link)

Meaning:	The fabric contains switches with a mix of interoperability mode
	settings.
Action:	Configure all switches in the fabric to have the same value for
	interoperability mode.

(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action to be brought online.)

Meaning:	When deactivating a security set, ports that were previously
	downed due to security violations remain down.
Action:	Reset the ports or place the ports online.

(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)

Meaning:	An attempt to activate fabric binding with an ISL group that has no
	members is not allowed because there are inter-switch links (ISL)
	logged in to the switch.
Action:	Configure all ISLs offline or add each ISL member with fabric
	binding information to the ISL group before activating.

3-10 59060-05 A