Q-Logic FIRMWARE VERSION 7.4 manual A2003.0003 Fan flow match Alarm Cleared

3 – Event Messages Alarm Events

S

(A2003.0003) (Fan flow match - ALARM CLEARED)

Meaning:	The opposing fan air flow condition has been corrected.
Action:	None

(A2004.0001) (Secondary cpu_blade assuming control of system due to a failure of Primary cpu_blade)

Meaning:	Control is transferring from the primary CPU blade to the
	secondary CPU blade on a SANbox 9000 switch.
Action:	Investigate the former primary CPU blade for the cause of the
	failure.

(A2004.0002) (Secondary cpu_blade assuming control of system due to an administrative switchover)

Meaning:	Control is transferring from the primary CPU blade to the
	secondary CPU blade on a SANbox 9000 switch.
Action:	None

(A2004.0003) (Secondary cpu_blade assuming control of system due to an opening of the latch or removal of Primary cpu_blade)

Meaning:	Control is transferring from the primary CPU blade to the
	secondary CPU blade on a SANbox 9000 switch.
Action:	None

(A3000.0001) (Temp overheat, sensor_name sensor reads value C - ALARM SET)

Meaning:	The chassis temperature has reached a failure threshold.
Action:	Check air flow, fan operation, and ambient temperature. If the
	problem cannot be corrected, power down the switch.

(A3000.0002) (Temp sensor sensor_name on blade slot_number reads value C - ALARM SET)

Meaning:	The chassis temperature has reached a failure threshold.
Action:	Check air flow, fan operation, and ambient temperature. If the
	problem cannot be corrected, power down the switch.

(A3001.0001) (Temp overwarm, sensor_name sensor reads value C - ALARM SET)

Meaning:	The chassis temperature has reached a warning threshold.
Action:	Check air flow, fan operation, and ambient temperature.

(A3002.0001) (sensor name sensor has returned to normal range - ALARM CLEARED)

Meaning:	The chassis temperature has returned to the normal range and the
	alarm condition has been cleared.
Action:	None

3-42 59060-05 A