Installation Instructions

This Quick Start Guide describes how to install and configure your new QLogic iSR6140 Router by following these steps:

❑Step 1. Verify the package contents.

❑Step 2. Complete the pre-installation checklist.

❑Step 3. Mount the router.

❑Step 4. Install the SFPs.

❑Step 5. Apply power to the iSR6140 router.

❑Step 6. Install the SANsurfer® Router Manager.

❑Step 7. Configure iSR6140 management port IP address.

❑Step 8. Run the configuration wizard.

❑Step 9. Present LUNs to iSCSI initiators.

Step 1. Verify the Package Contents

The QLogic iSR6140 Router is shipped with the following items:

❑iSR6140 Router (1)

❑Small Form Factor Pluggable (SFP) transceivers (2)

❑AC power cord (1), CD (1), and serial adapter (1)

Optional equipment:

❑Shelf for rack mount

Step 2. Complete the Pre-installation Checklist

During the initial configuration process, the system prompts you to enter the following parameters. Use the space provided to record the IP addresses.

Symbolic Name of this iSR6140

Management port IP address, subnet mask, and gateway (if not using DHCP)

iSCSI port 1 IP address, subnet mask, and gateway (GE-1)

iSCSI port 1 iSN IP address (GE-1)

iSCSI port 2 IP address, subnet mask, and gateway (GE-2)

iSCSI port 2 iSNS IP address (GE-2)