Features

1 – Introduction Features

500 meters at the data rate of 1 Gbps; less than 300 meters at the data rate of 2 Gbps).

With its increased connectivity and performance, Fibre Channel is the I/O technology preferred and used by system designers.

1.4

■Compliance with PCI Local Bus Specification revision 2.2

■Compliance with PCI-X Addendum (revision 1.0) to the PCI Local Bus Specification

■Compliance with Third Generation Fibre Channel-Physical and Signaling Interface (FC-PH-3) standard

■Compliance with Fibre Channel-Arbitrated Loop (FC-AL-2) standard

■Compliance with U.S. and international safety and emissions standards

■Support for bus master DMA

■Fast!UTIL BIOS utility to customize the configuration parameters on the QLA23xx HBA and attached drives

■Supports Fibre Channel protocol-SCSI (FCP-SCSI) and IP

■Supports point-to-point fabric connection (F-PORT FABRIC LOGIN)

■Supports Fibre Channel security protocol (FC-SP) using DH-CHAP (Solaris SPARC 2.6, 7, 8, and 9 only)

■Supports fabric device management interface (FDMI) on the following operating systems: Windows 2000; Windows Server 2003; Red Hat Linux 8 and 9, Advanced Server 2.1; SuSE SLES 8; Solaris 2.6, 7, 8 and 9

Using FDMI, storage area network (SAN) administrators can view device-specific information (for example, driver version, firmware version, and model number) from a central console, regardless of the device manufacturer. This information is kept at the FC switch and viewed through the switch's management application or third party SAN management applications.

1-2	FC2354603-00 A