Q-Logic QLA22XX manual Preinstallation Procedures, What You Need for Installation

Page 7

Section 2

Hardware Installation

2.1

Preinstallation Procedures

Before installing your QLA22xx board, take a moment to read this guide.

CAUTION! The QLA22xx board contains parts that can be damaged by electrostatic discharge (ESD). Before handling the QLA22xx board, use standard methods to discharge static electricity. Keep the QLA22xx board in the antistatic bag until you are ready to install it. Place the board on the bag when you examine or configure it. Retain the bag for future use.

2.2

What You Need for Installation

Before you install the QLA22xx board in your computer, you need the following:

A screwdriver (usually a Phillips #1)

A high-speed, serial data connector (HSSDC) cable for the QLA2200/2200L board

An optical, multimode cable with an SC-style duplex connector for the QLA2200F/2202F/2212F board

An optical mutimode cable with an LC-style duplex connector for the QLA2204F board

One of the following cables for each of the three-position point-to-point adapters on the QLA2212F board (J3 and J4; see figure 2-7):

PTP to HDDSC-AMP636351-X

PTP to DB-9 plug-AMP 636373-X

PTP to DB-9 receptacle-AMP 636372-X

A GBIC and appropriate cable for the QLA2200G board

NOTE: QLogic does not supply cables. Contact your distributor for the appropriate cable type and length.

Figures 2-1through 2-6identify the QLA22xx board components referenced throughout this section.

Each QLA22xx board has a unique serial number; its location on the board is noted in figures 2-1through 2-6. Take a minute to write down the serial number of the

FC0151103-00 E

2-1

Image 7
Contents Hardware Installation Guide for QLA22xx Board Family QLogic Corporation Table of Contents Figures General Description IntroductionFeatures What is Fibre Channel?What You Need for Installation Preinstallation ProceduresQLA2200 Board Layout QLA2202F Board Layout QLA2204F Board Layout QLA2200G Board Layout Installation in the Computer Power DistributionFC0151103-00 E Installation Help Hardware Problem Checklist Problems After InstallationSystem Configuration Problem Checklist Fibre Channel Problem Checklist Introduction Configuration SettingsSelectable Boot Settings Host Adapter SettingsTable A-1. Host Adapter Settings Raw Nvram Data Restore Default SettingsAdvanced Adapter Settings Table A-2. Advanced Adapter SettingsConfiguration Settings Fast!UTIL Table A-3. Extended Firmware Settings Extended Firmware SettingsTable A-5. Connection Options Table A-4. RIO Operation ModesFibre Disk Utility Scan Fibre Channel DevicesSelect Host Adapter Select Host Adapter Fast!UTIL FC0151103-00 E Table B-1. QLA22xx Board Operating Environment Table B-2. QLA22xx Board SpecificationsOptic support available using an external MIA

QLA22XX specifications

The Q-Logic QLA22XX series encompasses a range of high-performance Fibre Channel Host Bus Adapters (HBAs) designed to enhance data storage and network connectivity within enterprise environments. Specifically, these adapters are tailored for environments requiring robust storage solutions, ensuring that organizations can effectively manage their data traffic and optimize their storage strategies.

At the heart of the QLA22XX is its adherence to the Fibre Channel standard, which allows for high-speed connections between servers and storage devices. These adapters support speeds of up to 16 Gbps, which provides the bandwidth necessary for handling multiple workloads simultaneously. This capability is crucial for businesses that rely on rapid access to large volumes of data, thereby facilitating quicker decision-making processes and enhancing productivity.

The QLA22XX series features advanced technologies such as enhanced error correction and adaptive routing. These technologies ensure data integrity and reliability during transfer, reducing the likelihood of data corruption. Additionally, the adaptiveness of the routing capabilities allows the HBA to optimize performance by dynamically adjusting to various network conditions and topologies.

Another key characteristic of the QLA22XX is its compatibility with a multitude of operating systems, including major platforms like Windows, Linux, and VMware. This broad compatibility simplifies deployment across diverse IT ecosystems, making it easier for organizations to integrate these HBAs without extensive modifications to their existing infrastructure.

Moreover, the QLA22XX series supports the latest management and monitoring tools, enabling administrators to have complete visibility into performance metrics and potential issues. This includes support for the SNMP protocol, which facilitates proactive monitoring and management of the networked storage systems.

Energy efficiency is also a consideration in the design of the QLA22XX series. These adapters are engineered to minimize power consumption, which not only aids in reducing operational costs but also contributes to the organization's sustainability goals.

In summary, the Q-Logic QLA22XX series is a reliable and high-performance Fibre Channel HBA solution. With its high-speed connectivity, advanced technologies for data integrity, broad compatibility, and proactive management features, it stands out as a robust option for enterprises looking to enhance their data storage and network connectivity capabilities.