Q-Logic QLA22XX manual Power Distribution, Installation in the Computer

Page 12

Power Distribution

2 – Hardware Installation

TXRX

J3J4

J1

SERIAL NUMBER

J2

ISP CHIP

ISP CHIP

Figure 2-7. QLA2212F Board Layout

2.3

Power Distribution

The QLA2200/2200L board supplies +5 volts to pin 7 of the HSSDC copper interface to support an external media interface adapter (MIA), if required. (An MIA converts copper bus signals to optical bus signals.)

2.4

Installation in the Computer

Perform the following steps to install the QLA22xx board in your PC:

1.Check the motherboard and make any configuration changes necessary to accommodate the QLA22xx board.

The QLA22xx board is self-configuring; however, some motherboards require manual configuration. For example, some systems have a PCI Device Configuration menu in the motherboard setup BIOS where you must enable host adapter boards, bus master slots, and interrupt request (IRQ) levels. If the motherboard supports triggering, use level triggering for the QLA22xx board. See the documentation supplied with your computer, or contact your computer dealer to determine if your motherboard requires configuration.

2.Power down the peripherals, then the computer.

3.Remove the computer cover and save the screws.

2-6

FC0151103-00 E

Image 12
Contents Hardware Installation Guide for QLA22xx Board Family QLogic Corporation Table of Contents Figures Introduction General DescriptionWhat is Fibre Channel? FeaturesPreinstallation Procedures What You Need for InstallationQLA2200 Board Layout QLA2202F Board Layout QLA2204F Board Layout QLA2200G Board Layout Power Distribution Installation in the ComputerFC0151103-00 E Installation Help Problems After Installation Hardware Problem ChecklistSystem Configuration Problem Checklist Fibre Channel Problem Checklist Configuration Settings IntroductionHost Adapter Settings Selectable Boot SettingsTable A-1. Host Adapter Settings Restore Default Settings Advanced Adapter SettingsTable A-2. Advanced Adapter Settings Raw Nvram DataConfiguration Settings Fast!UTIL Extended Firmware Settings Table A-3. Extended Firmware SettingsTable A-4. RIO Operation Modes Table A-5. Connection OptionsScan Fibre Channel Devices Fibre Disk UtilitySelect Host Adapter Select Host Adapter Fast!UTIL FC0151103-00 E Table B-2. QLA22xx Board Specifications Table B-1. QLA22xx Board Operating EnvironmentOptic support available using an external MIA

QLA22XX specifications

The Q-Logic QLA22XX series encompasses a range of high-performance Fibre Channel Host Bus Adapters (HBAs) designed to enhance data storage and network connectivity within enterprise environments. Specifically, these adapters are tailored for environments requiring robust storage solutions, ensuring that organizations can effectively manage their data traffic and optimize their storage strategies.

At the heart of the QLA22XX is its adherence to the Fibre Channel standard, which allows for high-speed connections between servers and storage devices. These adapters support speeds of up to 16 Gbps, which provides the bandwidth necessary for handling multiple workloads simultaneously. This capability is crucial for businesses that rely on rapid access to large volumes of data, thereby facilitating quicker decision-making processes and enhancing productivity.

The QLA22XX series features advanced technologies such as enhanced error correction and adaptive routing. These technologies ensure data integrity and reliability during transfer, reducing the likelihood of data corruption. Additionally, the adaptiveness of the routing capabilities allows the HBA to optimize performance by dynamically adjusting to various network conditions and topologies.

Another key characteristic of the QLA22XX is its compatibility with a multitude of operating systems, including major platforms like Windows, Linux, and VMware. This broad compatibility simplifies deployment across diverse IT ecosystems, making it easier for organizations to integrate these HBAs without extensive modifications to their existing infrastructure.

Moreover, the QLA22XX series supports the latest management and monitoring tools, enabling administrators to have complete visibility into performance metrics and potential issues. This includes support for the SNMP protocol, which facilitates proactive monitoring and management of the networked storage systems.

Energy efficiency is also a consideration in the design of the QLA22XX series. These adapters are engineered to minimize power consumption, which not only aids in reducing operational costs but also contributes to the organization's sustainability goals.

In summary, the Q-Logic QLA22XX series is a reliable and high-performance Fibre Channel HBA solution. With its high-speed connectivity, advanced technologies for data integrity, broad compatibility, and proactive management features, it stands out as a robust option for enterprises looking to enhance their data storage and network connectivity capabilities.