Planar Essential Controls and Functions for Optimal Use of Projectors

Controls and Functions

1. PLANAR LOGO BADGE	Vertical Lens Shift	Horizontal
Remove to access the lens		Lens Shift
shift controls.		(PD8150 only)

2.REAR COVER

Remove to access connectors.

3.LAMP MODULE COVER

Remove this cover to access the lamp compartment.

4.CABLE OPENING

Pass cables through this opening.

5.CEILING MOUNT HOLES

Use these to attach the ceiling bracket to the projector.

6.ADJUSTABLE FEET

Use these when the projector is installed in a table-top configuration to level the image and/or adjust the projection angle.

7.PROJECTION LENS

The inside of the lens barrel is threaded to accommodate a standard, 72-mm lens filter. For example, with a smaller screen you can install a neutral-density filter to reduce the overall light output.

8 Planar PD8130/PD8150 Installation/Operation Manual