Planar PD8150 Performance, Microdisplay, Native Resolution, Aspect Ratios, Projection Lens, Lamp

Specifications

Table 7-1. PD8130/PD8150 Specifications (continued)

	Performance
Microdisplay:	Texas Instruments DLP® 1080p DMD
Native Resolution:	Full HD, 1920 x 1080 (2,073,600 pixels)
Aspect Ratios:	Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3,
	4:3 Narrow, Letterbox (Anamorphic lens
	compatible)
Projection Lens:	All glass, F/2.5~2.71, f = 39.1~50.1mm, 1.3x manual
	zoom, made in Japan
Throw Ratios:	1.85 – 2.40 (distance/width) – Standard lens
	1.56 – 1.86 (distance/width) – Optional short-throw
	lens
Vertical Lens Shift Range	PD8130:
(Ceiling Mount):	Down = 25% to 60% of screen height below lens
	center (50% to 120% of one half of the screen
	height)
	PD8150:
	Up = 25% of screen height above lens center
	(50% of one half of the screen height)
	Down = 60% of screen height below lens center
	(120% of one half of the screen height)
Horizontal Lens Shift Range:	PD8130: None
	PD8150: 7.5% of screen width left or right of lens
	center (15% of one half of the screen width)
Video Lumens:	1,000 ANSI lumens (maximum) calibrated at D65
Sequential Contrast –	PD8130: 10,000:1 typical
DynamicBlack On:	PD8150: 15,000:1 typical
Cooling Performance:	High efficiency adaptive voltage side-to-side
	cooling with low system acoustic noise level and
	low light pollution cabinet
Projection Modes:	Front, Rear, Ceiling (front/rear)
Lamp:	User replaceable 180/230W HPM (selectable),
	4000 hour lifetime at 180W setting
Video Processing:	Planar customized Gennum GF9450 with 10 bit
	independent dual channel image processing,
	true 1080i deinterlacing, MPEG artifact reduction
	(block and mosquito noise), latest motion
	adaptive processing, 3D noise reduction, detail
	enhancement, rich color processing and noise
	reduction, less than one frame latency
Calibration:	Full RGB gain/offset control (White Balance),
	Gamma, Contrast, Color Temperature, Brightness

80 Planar PD8130/PD8150 Installation/Operation Manual