Planar PD8130, PD8150 operation manual LED is flashing red

Maintenance and Troubleshooting

Table 5-1. Troubleshooting Chart (continued)

Symptom Possible Cause(s) Solution

Image appears “washed out” and/or dark areas appear too bright.

• Brightness is set too	• Lower the brightness
high.	setting.

Colors in the image are	• The Red/Pr, Green/Y or	• Ensure that the source
swapped; for example,	Blue/Pb outputs from	outputs are connected
reds appear blue or vice	the source are	to the correct
versa.	connected to the	PD8130/PD8150 input.
	wrong inputs on the
	PD8130/PD8150.

LED is flashing alternating	• The lamp cover is open.
green and red.	•	The lamp has failed or
		exceeded its usage life.
LED is flashing red.	•	PD8130/PD8150 internal
		temperature is too high.

•Close the lamp cover.

•Replace the lamp with a new one.

•Power off the PD8130/PD8150 and allow it to cool down. Ensure that the intake and exhaust vents are not blocked. Turn the projector back on. If the problem persists, please contact Planar Technical Support for assistance.

LED lights solid red.	• Fans are not working	• Please contact Planar
	properly or power-on	Technical Support for
	self-test has failed.	assistance.

Planar PD8130/PD8150 Installation/Operation Manual 65