Planar PD8130, PD8150 operation manual Introduction, About This Manual, Target Audience

Introduction

This Owner’s Manual describes how to install, set up and operate the Planar PD8130/PD8150 Digital Light Processing (DLP™) Projector.

Throughout this manual, the Planar PD8130/8150 1080p DLP Projector is referred to as the “PD8130/PD8150.”

1.1

About This Manual

Planar has prepared this manual to help home theater installers and end users	Target Audience
get the most out of the PD8130/PD8150.

Planar has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Planar product manuals on-line, at www.Planar.com.

Planar welcomes your comments about this manual. Send them to	If You Have Comments
info@Planar.com.	About This Manual...
Text Conventions: The following conventions are used in this manual, in order to	Textual and Graphic
clarify the information and instructions provided:	Conventions

•Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type op aspect = 1 <Enter>. ”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

Note	A carriage return must be used after each command or
	string.

Planar PD8130/PD8150 Installation/Operation Manual 1