Installation
3.5
Connections to the PD8130/PD8150
Proceed as follows to connect the PD8130/PD8150 to your video sources, external controller(s) – if present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
| • Ensure that the cables are securely connected. Tighten the thumbscrews on |
| connectors that have them. |
Connector Panel Access ➤ | Using a |
| the two screws holding the rear |
| compartment cover in place. |
Then, remove the rear compartment cover by tilting it upward.
22 | Planar PD8130/PD8150 Installation/Operation Manual |
