Planar PD8150, PD8130 operation manual Exhaust Vent

Controls and Functions

•POWER BUTTON/STATUS LED Indicates projector status as follows:

• Solid green = AC power present, ready to turn on (lamp not lit)

•Flashing green = lamp is warming up or cooling down; keypad functions not allowed

•Off = Lamp lit, projector functioning normally

•Alternating green/red = Lamp problem (door open, unable to strike, end of life), user intervention likely to fix problem

•Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix problem

•Solid red = Error that requires servicing (fan fail, Power-on self-test fail etc.)

•EXHAUST VENT

Warm air exits the projector through this vent. Ensure that it is not blocked.

•INTAKE VENT

Internal fans draw cool air into the projector through this vent.

•ZOOM RING

Rotate this to change the projected image size.

•FOCUS RING

Rotate this to focus the projected image.

•PROJECTION LENS

Available in two versions: standard throw range (1.85:1 to 2.40:1) and short throw range (1.56:1 to 1.86:1).

•FRONT IR SENSOR

Receives infrared signals from the remote control unit.

6 Planar PD8130/PD8150 Installation/Operation Manual