Pelco manual Rack Mounting, To install the NSM5200 in a rack

Page 14

RACK MOUNTING

The NSM5200 mounts into an industry-standard 19-inch (48 cm) equipment rack. The NSM5200 occupies three rack units (5.25 in. or 13.3 cm) of vertical rack space. The hardware necessary to mount the NSM5200 into a rack is supplied with the unit.

The rack must meet the following requirements:

•19-inch (48 cm) EIA-310-D compliant (rear column required)

•Rack column depth: 24 to 30 inches (61 to 76 cm)

•Column mounting hole provisions: 10-32 UNF-2B threaded holes or square window holes on front and rear columns

•Door systems are acceptable. Front doors must have at least 2 inches (5.1 cm) between the NSM5200 front bezel and the inside of the door. Rear doors may only be used on rack columns that are more than 26 inches (66 cm) deep.

WARNINGS:

•Secure the front and rear screws to the support rails.

•Make sure the NSM5200 is level.

•Slots and openings in the cabinet provide ventilation to prevent the unit from overheating. Do not block these openings. Never place the unit near or over a radiator or heat register. When placing the unit in a rack, be sure to provide proper ventilation.

•Four of the six redundant fans are located in the upper-middle portion of the unit. If the unit must be pulled out to replace a fan, make sure that all cables connected to the unit have sufficient length to avoid being disconnected.

To install the NSM5200 in a rack:

NOTE: Figure 3 on page 11 identifies each piece of hardware for this procedure.

1.If chassis mounting brackets are not attached: Attach one mounting bracket to each side of the NSM5200. Use six 10-32 x 0.25-inch Phillips pan head screws for each bracket. Attach the brackets so that the tapered ends are positioned toward the rear of the unit.

ATTACH BRACKETS

(6) SCREWS 10-32 X 0.25-INCH PHILLIPS PAN HEAD

Figure 6. Fastening Mounting Brackets to Chassis

2. Remove the rubber feet from the underside of the unit if they are attached.

14

C3683M (3/09)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Endura NSM5200 Series Page Contents List of Illustrations List of TablesRegulatory Notices Video Quality CautionDescription Features Fully Compatible with EnduraModel Storage Country Code Optional AccessoriesModels Qty Description Parts ListBefore You Begin Package Contents USER-SUPPLIED PartsRack Mount Kit Product Serial Number Label Placement Product Serial Number LabelsEquipment Placement and Rack Mounting Desktop InstallationTo install the NSM5200 in a rack Rack MountingAssembling a Support Rail Repeat for the other rail set Rack Front Tighten the two screws to secure the spacer to the rack Attaching Rack Rail Spacers Repeat for the second spacerThumbscrew Hard Drive Array Installation Installing Hard Drive CarriersC3683M 3/09 Connecting Power ConnectionsConnecting to the Network Network Cable ConnectionFront Panel Controls and Indicators OperationNetwork Port 2 Speed and Activity Software StatusNetwork Port 1 Speed and Activity Unit StatusUnit Startup Unit ShutdownProblem Possible Causes Suggested Remedy TroubleshootingPower Supplies Interface SpecificationsPower Blue Pelco badge Software Status Auxiliary Interfaces USBPhysical Construction Steel cabinet Finish Front bezelYou do not have to shut down the NSM5200 to add a DAS5200 AppendicesAppendix a Expanding Video Storage Appendix B Installing AN Uninterruptible Power Supply UPS Connecting a UPS to an NSM5200Product Warranty and Return Information
Related manuals
Manual 12 pages 55.5 Kb

NSM5200 specifications

The Pelco NSM5200 is a cutting-edge network video storage management solution that offers enhanced security and reliability for surveillance systems. It is designed primarily for large-scale installations, making it an ideal choice for businesses, enterprises, and organizations that require a robust and scalable solution for video surveillance.

One of the main features of the NSM5200 is its ability to support high-definition video streams from multiple sources. It can handle a substantial number of simultaneous camera feeds, ensuring that users can capture critical moments without any loss in quality. This is particularly important for environments where detail and clarity are paramount, such as retail spaces, transportation hubs, and critical infrastructure sites.

The NSM5200 utilizes advanced technologies that ensure smooth data processing and storage management. It supports various compression formats, including H.264 and H.265, which help to optimize bandwidth usage while maintaining high image quality. This efficiency is crucial for organizations looking to reduce data storage costs and improve network performance without compromising the integrity of their surveillance feeds.

In terms of storage capacity, the NSM5200 is adaptable to different needs. It can be configured with multiple hard drives, providing a flexible storage architecture that can grow with the organization. Users can easily expand their storage as their surveillance needs increase, ensuring long-term viability of the system.

The NSM5200 also incorporates intelligent video analytics capabilities that enhance the functionality of the surveillance system. This includes features such as motion detection, facial recognition, and loitering detection, allowing for proactive monitoring and faster response times during security incidents. Such analytics not only aid in real-time monitoring but also provide valuable insights for post-incident investigations.

Moreover, Pelco's NSM5200 is equipped with an easy-to-use interface that simplifies the management of video data. The intuitive user experience allows operators to quickly access live feeds, recorded footage, and analytics without extensive training. Additionally, the open architecture of the system enables seamless integration with third-party applications and hardware, offering users greater flexibility in designing their security solutions.

In conclusion, the Pelco NSM5200 stands out as a reliable and flexible video storage management system, designed to meet the demands of modern surveillance environments. With its high-definition support, advanced analytics, and scalable architecture, it serves as a powerful tool for enhancing security and operational efficiency across a variety of sectors. Organizations can trust the NSM5200 to not only safeguard their assets but also to adapt and evolve as their security needs change.
Top Page Image Contents