Connections
Familiarize yourself with the NSM5200 rear panel before connecting any equipment to the unit.
Figure 16. Rear Panel Layout
ì
î
ï
ñ
ó
r s
Power Supply Connectors
Power Supplies
Power Supply LEDs (status)
Mute button
Fibre Channel Connector
Ethernet Port 2 (reserved for future use)
t u ~í ~â ~ä ~ã ~å
Ethernet Port 1
VGA Port
Serial Port
USB 2.0 Ports (2)
Connector for Keyboard (purple)
Connector for Mouse (green)
Power Supply (reserved for future use)
CONNECTING POWER
The NSM5200 is equipped with two
100to 240 VAC (50/60 Hz). You should also install an uninterruptible power supply (UPS), which is not supplied. UPS devices maintain a limited amount of backup battery power if the main power fails. Refer to Appendix B: Installing an Uninterruptible Power Supply (UPS) on page 30 for more information.
NOTE: Connect each power supply to a different branch circuit. This ensures optimal performance, reduces possible video loss, and reduces power leakage to a safe level.
To connect the power supplies:
1.Connect each power cord to a power supply connector.
2.Connect the other end of each power cord to the appropriate power source.
When connected, the power supply status indicators glow solid red. As soon as the unit starts, the indicators glow solid green. During operation, if either indicator is not lit or glows red, there is a problem with a power supply.
C3683M (3/09) | 21 |