5.5 Attaching Identification Labels
Labels are&&supplied with&&&the BM for recording the&&unit's setup parameters Use these labels to provide ready information for persons who will maintain the BM in the future
Before completing the BM installation, enter the required information on the labels and attach them to the BM Place the labels on the unit in positions where they can be easily seen
5.5.1Modbus Plus Port Label
On this label enter the Modbus Plus network number and node address you have assigned to the BM Place the label on the BM so that it can readily identify the unit in your application
Figure 23 shows the layout of the label
Modbus Plus
Network
Node
Figure 23 Modbus Plus Port Label
80 Installing the BM85
890 USE 103 00