Pelco PMCP660, PMCP650 manual Connecting DVI Input, Connecting External Amplified Speakers

CONNECTING DVI INPUT

Refer to Figure 7. To use DVI (Digital Video Interface) input, do the following:

1.Connect the DVI-jack of the Pelco multiviewer, Endura, or computer to the monitor’s DVI input jack.

2.Connect the device’s red (R) and white (L) audio jacks to the monitor’s R and L audio-in jacks located next to the DVI connector. Audio might be used with DVD players or PCs.

MULTIVIEWER

Figure 7. Connecting DVI Input

CONNECTING EXTERNAL AMPLIFIED SPEAKERS

Refer to Figure 8. You can connect this monitor to an external set of amplified speakers using the EXTERNAL SPEAKER OUTPUT (L/R) jacks located on the back of the monitor. A standard size phono jack is required to plug into the L/R jacks on the monitor. These line-out connections can also be sent to an amplifier to play through a stereo or home theater system.

OR

SPEAKERS SPEAKERS

Figure 8. Connecting External Amplified Speakers

12 C2938M (12/06)