Pelco PMCP650, PMCP660 manual Picture is Distored with Abnormal Patterns, Sound but no Picture

Page 33

PICTURE IS DISTORED WITH ABNORMAL PATTERNS

•Possible cause: The signal cable is not connected properly.

Remedy: Make sure the signal cable is attached firmly to the back of the monitor, and from the source.

•Possible cause: The input signal is beyond the monitor’s capabilities.

Remedy: Check the video signal source to see if it is beyond the monitor’s range. Verify the signal source’s specifications with the monitor’s specifications.

DISPLAY IMAGE DOES NOT FILL THE SCREEN COMPLETELY

•Possible cause: Under RGB mode, the H-Size and V-Size are set incorrectly.

Remedy: Use H-Size and V-Size to adjust the video size.

•Possible cause: Under AV1, AV2, or Component with 480i input, the 4:3 Wide mode is switched on.

Remedy: Use the WIDE button to scroll through the various full screen modes.

SOUND BUT NO PICTURE

Possible cause: Improperly connected source signal cable.

Remedy: Make sure both video inputs and sound inputs are correctly connected.

PICTURE BUT NO SOUND

•Possible cause: Improperly connected source signal cable.

Remedy: Make sure both video inputs and sound inputs are correctly connected.

•Possible cause: Volume is turned all the way down.

Remedy: Use VOL +/- to hear sound.

•Possible cause: Mute is turned on.

Remedy: Use the MUTE button to switch off mute.

C2938M (12/06)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Series Flat Panel Plasma Monitors Page Contents List of Illustrations Important Safety Instructions Radio and Television Interference Regulatory NoticesDescription Package ContentsModels UnpackingInstallation Rear Panel ConnectorsDesktop Stand Page Connecting S-VIDEO Input Connecting Component Video InputVideo and Audio Connections Connecting Monitor Output Connecting Video InputConnecting External Amplified Speakers Connecting DVI InputConnect Power Using RGB VGA or DVI Video InputSetting UP Your Display Using Plug and Play PC ConnectionsC2938M 12/06 Plug and Play Screen Click OK to complete the setting Front Panel Controls OperationInstalling Remote Control Batteries Remote Control Functions Not in use Basic Functions Advanced Functions Adjusting Picture SettingsAdjusting Sound Settings Resetting Picture to Factory DefaultsSelecting Language Resetting Sound to Factory DefaultsSetting Power Save Mode Adjusting Color TemperatureFreezing Current Picture Minimizing Screen Sticking Using Pixel ShiftAdjusting Menu Transparency Opaqueness Selecting ON-SCREEN Display TimeoutScreen Size Changing Screen SizeRGB Mode Preset Setting UP RGB InputViewing PIP Select PIP ModeSwap PIP Information Screen InformationMaintenance CleaningTroubleshooting Display Image does not Fill the Screen Completely Picture is Distored with Abnormal PatternsSound but no Picture Picture but no SoundMode Supported Input ModesGeneral SpecificationsEnvironmental Menu IndexPage Product Warranty and Return Information ISO9001
Top Page Image Contents