Pelco PMCP660, PMCP650 manual Setting UP RGB Input, RGB Mode Preset

SETTING UP RGB INPUT

RGB Mode Preset

You can access the RGB mode preset by pressing the INPUT button, as follows:

1.Press the MENU button on the front panel or the remote control.

2.Press the VOL+ or VOL- button to select Screen.

3. Press the button to enter the selected menu group.

Automatic Adjustment

You can adjust the PC screen automatically, as follows:

1.	Press the or button to select Auto Positioning (refer to Figure 32).
2.	Press the VOL+ or VOL- button. Screen quality and position are automatically adjusted.

You can also adjust the PC screen automatically by pressing the AUTO button on the remote control.

Figure 32. Automatic PC Adjustment

28 C2938M (12/06)