Pelco DVR5KUP-250-1TB, DVR5KUP-500-800, DVR5KUP-250-800, DVR5KRP-400, DVR5KUP-250-500 C2647M 10/06

Page 10

WARNING: Never replace a hard disk with a formatted hard disk. Use only a Pelco-certified hard disk drive (250, 400, or 500 GB). Using any other hard disk drive with the DVR5100 voids the manufacturer's warranty for the unit.

5.To return the cage to the chassis do the following:

a.Attach the power and data cable to the drive or drives.

b.Place the cage in the chassis and guide the tabs under the retainer bracket.

Figure 12. Inserting the Hard Disk Drive Cage in the Chassis

c.Fasten the two screws to the chassis. Do not overtighten the screws.

Figure 13. Securing the Hard Disk Drive in the Chassis

The unit is ready to be reassembled.

10	C2647M (10/06)

Image 10

Contents Hard Disk Drive Replacement Instructions Contents Models IntroductionParts and Tools Removing the Power Cord Getting StartedESD Protection Preparing the Unit to Install a Drive Hard Disk Drive ReplacementRemove the top cover of the DVR refer to Figure Installing a Hard Disk Drive Loosening the Hard Disk Drive CageRemoving the Power Cable C2647M 10/06 C2647M 10/06 DVR5100 Login Screen With Keypad Reassembling the UnitRear Panel Connectors for the DVR5100 Audio Inputs 1 and 2 Audio inputs are assigned as followsTable A. Parts of the DVR5100 Back Panel Video input 9-16 are organized as follows Alarm input 9-12 for videoAlarm input 13-16 for video input 8 channel DVRProduct Warranty and Return Information ISO9001