Pelco DVR5KUP-250-800, DVR5KUP-500-800 Reassembling the Unit, DVR5100 Login Screen With Keypad

Page 11

REASSEMBLING THE UNIT

1.Replace the lid, and use the original screws to secure the lid in place.

2.Reattach any devices that you disconnected from the unit (refer to Figure 15).

3.Reconnect the power cord.

4.Restart the DVR5100, and then enter a user name and password on the Login screen to log on to the system.

NOTE: Restarting the DVR5100 after replacing a hard disk drive can take a long time. The system might need to copy information from the flash disk to the hard disk drive or drives, or video might need to be deleted from the hard disk drives. It might be several minutes before the Login screen appears.

Figure 14. DVR5100 Login Screen With Keypad

C2647M (10/06)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hard Disk Drive Replacement Instructions Contents Parts and Tools IntroductionModels Getting Started Removing the Power CordESD Protection Remove the top cover of the DVR refer to Figure Hard Disk Drive ReplacementPreparing the Unit to Install a Drive Loosening the Hard Disk Drive Cage Installing a Hard Disk DriveRemoving the Power Cable C2647M 10/06 C2647M 10/06 Reassembling the Unit DVR5100 Login Screen With KeypadAudio Inputs 1 and 2 Audio inputs are assigned as follows Rear Panel Connectors for the DVR5100Table A. Parts of the DVR5100 Back Panel 8 channel DVR Alarm input 9-12 for videoAlarm input 13-16 for video input Video input 9-16 are organized as followsProduct Warranty and Return Information ISO9001
Top Page Image Contents