Schneider Electric 66074 user manual Import configuration, Select the Remote Configuration tab

Page 13

Mupgrade Utility

For Network Management Cards

User Manual

8.1Import configuration

This function permit to import (upload) all the parameters managed in the Network Management Card Web interface:

1 - Select the Remote Configuration tab.

2 – Select the card that will be the master

3 – Click on “ Browse” to open the card Web interface and make the changes you want.

Then save your modifications

4 – Click on “ Import” to upload the configuration file, from the master card.

When import is finished, the following notification appears:

Mupgrade - User Manual

34003662EN/CA

Page 13/18

Image 13
Contents 66124 66123 66074 Mupgrade UtilityFor Network Management Cards Table of Contents For Network Management Cards Introduction InstallationBest environment to use it Cards compability For Network Management Cards CompatibilityFirmware compability For Network Management CardsFor Network Management Cards Operations description Start and Stop MupgradeDiscovering the Network Management Cards Firmware Upgrade tabDisplay the NMC Card by class 66074, 66123 Enter Username and Password Import and export installed UPS / STS list34003662EN/CA 10/18 34003662EN/CA 11/18 For Network Management Cards Remote Configuration Select the Remote Configuration tab Import configurationUPS configuration editor Configuration editorSTS configuration editor Be sure, you are inside the Remote Configuration Export configuration34003662EN/CA 17/18 Icon description in the UPS list For Network Management Cards Miscellaneous
Related manuals
Manual 81 pages 52.99 Kb