NTI
DISPLAY FUNCTIONS
An NTI RACKMUX with a 17” monitor supports resolutions up to SXGA (1280 x 1024) with a refresh rate at between 55 and 76Hz. When a 15” monitor is present, support for resolutions up to XGA (1024 x 768) apply with a refresh rate at between 55 and 76Hz. The quality of the image on the LCD monitor is adjustable using an On Screen Display (OSD) menu using the control buttons on the RACKMUX.
Standard Controls
The RACKMUX has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:
• The Power button turns the RACKMUX LCD and backlight ON and OFF as desired. | ||
• The Power LED located immediately below the Power button is a dual color | Power | |
LED. It will illuminate with a green color when the RACKMUX is powered | ||
ON/OFF | ||
ON and working properly. It will illuminate with a red color if the RACKMUX | ||
Power LED | ||
is powered ON but there is no input signal detected. |
•The Menu button is used to bring up the OSD menu where the various settings of the LCD display can be adjusted. Once the OSD screen is displayed, the Menu button is used to make selections within the menus. See "OSD Control Menu" (below) for more on LCD display settings.
•The Up and Down Arrow buttons are used to navigate through the menus. Move the cursor up or down as desired to highlight an item for selection. Once an item is highlighted, pressing the Menu button will select it.
Menu
Up Arrow
Down Arrow
Select/
Auto Adjust
Controls for the OSD Menus
Figure 9- OSD Controls
•The Select button is used to make selections within the OSD menus when the OSD menu is ON. When the OSD menu is OFF, the Select button will act as an Auto Adjust button to keep the user from having to use the menus to adjust the quality of the image on the monitor.
OSD Control Menu- VGA models
The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the OSD Menu, press the Menu button (above). To turn the Menu back OFF, either select "EXIT" from the main menu or just wait
OSD Main Menu
Selection | Purpose | |
Brightness/Contrast | Increase/decrease panel brightness/contrast level | |
Color | R,G,B color temperature control | |
Position | • Video Image horizontal and vertical position control | |
| • | Clock setting |
| • | Phase control |
Setup | • Control OSD Image position on screen | |
| • Set time OSD will stay on screen before auto shutoff | |
| • Select the language of the OSD menu | |
Exit | Exit from the OSD control menu |
Range
10 to 60 seconds
Several languages (see page 8)
7