Network Technologies ST-2U operation manual Units with touch screen support optional, VKTINT-xx-MM

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH

Units with touch screen support (optional)

1.Connect the 15HD male connector from a VGA multi-scan monitor to the port labeled MONITOR on the rear of the NTI ST-2U- TS switch. If a touch-screen type monitor is being used, connect the 9D male serial connector from the touch-screen monitor to the port in the USER set labeled SERIAL on the rear of the NTI ST-2U-TS switch. (See Fig. 12.)

RearViewofST-2U-TS

CPU2 CPU1 USER

SERIAL2 SERIAL1 SERIAL

CPU2 CPU1 USER

VIDEO2 VIDEO1 MONITOR PWR

VGA

Multi-Scan

Touch-Screen

Monitor

9DFemale

SerialConnector

15HDMale VideoConnector

Figure 12- Connect a touch-screen monitor to ST-2U-TS

2.If the CPU is using a touch-screen type monitor, connect the serial cable (MMEXT-xx) from the serial port of the CPU to the serial port of the ST-2U-TS switch (CPUx-SERIALx) with the same port number as the keyboard and video cables (See Fig. 13.)

VKTINT-xx-MM

PS/2COMPUTER

ATTACHONECOMPUTERTOPORTSLABELEDFORCPU1

RearViewofST-2U-TS

CPU2 CPU1 USER

SERIAL2 SERIAL1 SERIAL

VIDEO2 VIDEO1 MONITOR

CPU2 CPU1 USER

6	6	5	6	6	5	6	6	5
4	6	3	4	6	3		6
						4		3
	2	1	2		1		2	1

PWR

MMEXT-xx

VEXT-xx-MM

Figure 13- Connect serial device cable from CPU to ST-2U-TS

8