Network Technologies Connect SUN keyboard/mouse to ST-2U, Connect PS/2 CPU to ST-2U

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH

•SUN- Plug the SUN keyboard directly into the "USER" port.

8PinminiDINMale Connector

RearViewofST-2U

VIDEO2	VIDEO1	MONITOR	9VDC
		CPU2 CPU1 USER	.5A
			- +

SUNKeyboard/Mouse

Figure 6- Connect SUN keyboard/mouse to ST-2U

5.For each CPU connect the appropriate NTI input device and video cables to the proper ports on the ST-2U switch using the methods detailed below.

NOTE: Make sure the cables from a single CPU are connected to the ST-2U at a keyboard port and a video port with the same number.

•PS/2- Attach a VKTINT-xx-MM cable between the keyboard and mouse ports of the CPU and a 8 pin miniDIN female "CPU x" port on the ST-2U switch. (See Fig. 7.) (Ensure that the green 6 pin miniDIN mouse connector is in the mouse port on the CPU and that the purple 6 pin miniDIN keyboard connector is in the keyboard port on the CPU.) Attach a VEXT-xx-MM cable between the video port on the CPU and a 15HD female "VIDEO x" port on the ST-2U switch.

VKTINT-xx-MM

(PURPLE-KEYBOARD)

ATTACHONECPUTOPORTSLABELEDFORCPU1

(SHOWNHEREISAPS/2CPU)

PS/2CPU(GREEN-MOUSE)

VIDEO2 VIDEO1 MONITOR

CPU2 CPU1 USER

6	6	5	6	6	5	6	6	5
4	6	3	4	6	3		6
						4		3
	2	1	2		1		2	1

9VDC

.5A

-+

6PinminiDINMale Connector

VEXT-xx-MM

	8PinminiDINMale
15HDmale	Connector
VideoConnector

Figure 7- Connect PS/2 CPU to ST-2U

5