Sun Microsystems PCI-X manual To Verify the Attached Storage

▼To Verify the Attached Storage

●If online storage is connected to the HBA installed in a SPARC system, use the apply show-childrencommand to list the attached storage.

In the example that follows, a storage JBOD has twelve targets attached to one port of the dual-ported HBA.

TABLE 3-4

{0} ok apply		show-children			/pci@7c0/pci@0/pci@9/SUNW,emlxs@0
Device	ALPA	b6	WWPN 215000c0ff00223d
LUN	0	ESI Device			SUN	StorEdge 3510F D1046
Link attention
Device	ALPA	b9	WWPN 2100000c50c30555
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	ba	WWPN 2100000c50c30525
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	bc	WWPN 500000e010172831
LUN	0	Disk		FUJITSU MAP3147F SUN146G0301
Device	ALPA	c3	WWPN 2100000c50c3051b
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	c5	WWPN 2100000c50c30567
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	c6	WWPN 500000e0101727d1
LUN	0	Disk		FUJITSU MAP3147F SUN146G0301
Device	ALPA	c7	WWPN 21000004cf64f1db
LUN	0	Disk		SEAGATE ST336752FSUN36G 0508
Device	ALPA	c9	WWPN 2100000c50c30513
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	ca	WWPN 500000e0101727b1
LUN	0	Disk		FUJITSU MAP3147F SUN146G0301
Device	ALPA	cb	WWPN 2100000c50c3050e
LUN	0	Disk		SEAGATE ST3146807FC			0006
Device	ALPA	cc	WWPN 21000004cf64dc04
LUN	0	Disk		SEAGATE ST336752FSUN36G 0508
Device	ALPA	cd	WWPN 21000004cf5728c0
LUN	0	Disk		SEAGATE ST373307FSUN72G 0407
{0} ok

Note – You may need to use the reset-allcommand before entering apply

show-children.

Chapter 3 Hardware Installation 21