TABLE 3-1 Optical Cable Specifications
Maximum Length | Minimum Length | Connector | |
|
|
|
|
62.5/125 ∝m | 300 meters at 1.0625 Gbit/sec | 2 meters | LC |
(multimode) | 150 meters at 2.125 Gbit/sec |
|
|
| 70 meters at 4.25 Gbit/sec |
|
|
50/125 ∝m | 500 meters at 1.0625 Gbit/sec | 2 meters | LC |
(multimode) | 300 meters at 2.125 Gbit/sec |
|
|
| 150 meters at 4.25 Gbit/sec |
|
|
|
|
|
|
Follow these steps when attaching the optical cable:
1. Connect the
FIGURE 3-3 Attaching the Optical Cable
Port 1
Port 2
2. Connect the other end of the cable to the Fibre Channel device.
After the optical cable is connected to the HBA, you are ready to apply power to the system.
Chapter 3 Hardware Installation 17