Sun Microsystems 5210 NAS manual Click Send to send the message

To set up diagnostic e-mail:

1.In the toolbar at the top of the screen, select the button. The Diagnostic Email dialog box appears.

FIGURE A-1The Diagnostic Email Dialog Box

2.Enter a description of the problem in the Problem Description field. This is a mandatory entry and is limited to 256 characters.

3.Enter at least one e-mail recipient by typing it in the E-mail Address field. To include Sun Microsystems Technical Support as a recipient, enter “support@sun.com”.

4.Check the type of message you want to send: Notification, Diagnostic, or both.

5.Click the button to add the new recipient to the List of recipients. You can add

a maximum of four e-mail addresses in the list.

To remove a recipient from the list, select the e-mail address and click the button.

6.Click Send to send the message.

82 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004