Sun Microsystems HP LTO4 manual Dione Card, Firmware Requirements, Component

CHAPTER 2

Dione Card

The Dione card—pronounced (D - O - nee)—is a custom design that provides an Ethernet interface for the HP LTO4 tape drive. With this interface, the HP LTO4 tape drive can:

■Encrypt and decrypt data using the Sun StorageTek Crypto Key Management System (KMS), Version 2.0 and above

■Configure and enroll the tape drive using the Virtual Operator Panel (VOP), Version 1.0.12 or higher

Basically, the Dione card is a translation device between the serial interface on the tape drive and the secure Ethernet port for use with the KMS.

The Dione card includes:

■Telnet server for configuration and management

■FTP server for installing new firmware and retrieving firmware trace logs

■SOAP client (with TLS 1.0 support) for communication with the KMS

Firmware Requirements

The minimum firmware requirements include:

TABLE 2-1Firmware Requirements

Component	Version (or above)
Dione card	1.178
HP LTO4 tape drive	H45S Fibre Channel
	B44S SCSI
KMS Version 2.0	2.02
ACSLS	7.1 and 7.1.1 with PUT0701, or 7.2, and 7.3
SL8500 library	3.98B
SL3000 library	2.01 (SPS)—Requires approval
SL500 library	i15 — 1300 (SPS)—Requires approval
L-Series	3.18.xx
Virtual Operator Panel	1.0.12

316196601 • Revision: A 7