Sun Microsystems X6240 manual 1Worksheet for Solaris 10 Configuration

TABLE 3-1Worksheet for Solaris 10 Configuration

			Your Answers:
Information for Installation		Description or Example	Defaults (*)
Language		Select from the list of available languages for the	English*
		Solaris 10 software.
Locale		Select your geographic region from the list of
		available locales.
Terminal		Select the type of terminal that you are using from
		the list of available terminal types.
Network connection		Is the system connected to a network?	• Networked
			• Non-networked*
DHCP		Can the system use Dynamic Host Configuration	• Yes
		Protocol (DHCP) to configure its network	• No*
		interfaces?
If you are not	IP address	If you are not using DHCP, supply the IP address
using DHCP,		for the system.
note the network		Example: 129.200.9.1
address:
	Subnet	If you are not using DHCP, is the system part of a	255.255.0.0*
		subnet?
		If yes, what is the netmask of the subnet?
		Example: 255.255.0.0
	IPv6	Do you want to enable IPv6 on this machine?	• Yes
			• No*
Host name		A host name that you choose for the system.
Kerberos		Do you want to configure Kerberos security on this	• Yes
		machine?	• No*
		If yes, gather this information:
		Default realm:
		Administration server:

First KDC:

(Optional) Additional KDCs:

Chapter 3 Configuring the Preinstalled Solaris 10 Operating System 33