Power-Up Verification

!WARNING:

The power cord contains a 3-wire grounding-type plug which has a grounding pin. This is a safety feature. Grounding of the carrier is vital to ensure safe operation. Do not defeat the purpose of the grounding plug by modifying it or by using an adapter.

Prior to installation, use an outlet tester or voltmeter to check the ac receptacle for earth ground. If the power source does not provide a ground connection, consult an electrician to determine another method of grounding the carrier before proceeding with the installation.

1.Insert the IEC connector end of the power cord into the I/O card's power IEC 320 inlet.

2.Insert the plug into an ac outlet. The power supply LED lights.

Verification Checklist

Did the green power supply LED light? If not, see Troubleshooting.