Troubleshooting
Power Supply
Symptom | Possible Cause | Solutions |
|
|
|
No power. | The power cord is not securely | Check that the power cord is |
| plugged into the wall receptacle or | securely attached at both ends. |
| rear housing connection. |
|
|
|
|
| The wall receptacle has no power. | Check the wall receptacle power |
|
| by plugging in some equipment |
|
| that is known to be working. |
|
| Check the circuit breaker. |
|
|
|
| Power supply is not fully inserted | Reinstall the power supply, |
| into the housing. | making sure that you gently push |
|
| it all the way into the housing. |
|
|
|
If you are still having problems with the power supply, contact your service representative.
Removing the Power Cord
When disconnecting a power cord from an installed power supply:
1.Disconnect the power cord plug from the ac outlet first.
2.Disconnect the power cord from the rear of the power supply.
Power Failure Recovery
In cases of loss and restoration of nominal voltage conditions, this product automatically restores to service without manual intervention.
Copyright E 1998 Paradyne Corporation
7