Philips HTS3578W user manual Access VCD menu or preview menu, Sync audio output with video play

Access VCD menu or preview menu

The PBC (Playback Control) for VCD is activated by default in the factory.When you load a VCD, the contents menu is displayed.

1 Press to select a play option, then press OK to start play.

•If PBC is off, it skips the menu and starts play from the first title.

•To return to the menu during play, press BACK (only possible if the PBC mode is on).

2 Press DISC to preview the contents of the disc.

•To exit the menu, press DISC.

Select Digest Type:

Track Digest

Disc Interval

Track Interval

3 Select a preview play option, then press

OK

[Track Digest]

Plays the first few seconds of each track in a disc.

[Disc Interval]

Divides the total disc time by six and play the first few seconds of these intervals.

[Track Interval]

Divides the current track by six and play the first few seconds of these intervals.

This option is not available in stop mode.

Tip

•You can change the PBC setting (see ‘Adjust settings’ > ‘Preferences’ > [PBC]).

Sync audio output with video play

If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video.

1 Press and hold AUDIO SYNC until ‘AUDIO SYNC’ is displayed.

2 Within five seconds, press VOL +/- to set the delay time for audio output.

Note

•If the volume control is not used within five seconds, it resumes normal volume control function.

Quick skip play to a specific time

1 During play, press INFO.

»The disc status menu is displayed.

2 Press to view information, then press OK.

•[TT Time] (title time)

•[Ch Time] (chapter time)

•[Disc Time] (disc time)

•[Track Time] (track time)

3 Press the Numeric buttons to enter the time where you want to skip to, then press OK.

Note

•The options are different depending on the disc type.

28EN