Paradyne Hotwire 8620 GranDSLAM Installation Guide manual For Slots Tip, Ring

A. Pinouts

Telco 50-Pin Connector Pinouts for DSL Loops and POTS Splitters

The three Telco 50-pin receptacles on the rear of the chassis (labeled for Slots 1, 2, 3) provide the 2-wire loop interface from each DSL port to either the POTS splitter card or, if the loop is not being shared with POTS, then to the Main Distribution Frame (MDF). The following table lists the pin assignments for each of these interfaces.

CONN #	CONN PINS		1
for Slots 1–3	(Tip, Ring)
Port 1	1, 26	25
Port 2	2, 27
Port 3	3, 28		26
Port 4	4, 29		97-15526
		50
Port 5	5, 30
Port 6	6, 31
Port 7	7, 32
Port 8	8, 33
Port 9	9, 34
Port 10	10, 35
Port 11	11, 36
Port 12	12, 37
Port 13	13, 38
Port 14	14, 39
Port 15	15, 40
Port 16	16, 41
Port 17	17, 42
Port 18	18, 43
Port 19	19, 44
Port 20	20, 45
Port 21	21, 46
Port 22	22, 47
Port 23	23, 48
Port 24	24, 49
Port 25	25, 50

8620-A2-GN20-40 July 2003 A-5