Paradyne Hotwire 8620 GranDSLAM Installation Guide manual Technical Specifications, Dimensions

Page 55

Technical Specifications

B

Table B-1lists the technical specifications for the Hotwire 8620 GranDSLAM chassis.

Table B-1. Hotwire 8620 GranDSLAM Technical Specifications (1 of 2)

Specifications

Criteria*

 

 

 

Physical

Height:

5.22 inches (13.26 cm)

Dimensions

Width:

17.20 inches (43.69 cm)

 

Depth: 12.0 inches (30.48 cm)

 

Weight for AC Model: 18 pounds (8.16 kg)

 

Weight for DC Model: 14.4 pounds (6.53 kg)

 

A standard 7-foot EIA cabinet can hold a maximum of 14 chassis.

 

 

Interfaces

48V power (two pairs of screw terminals for A and B inputs)

 

One 8-pin modular jack for 10/100 BaseT Network Access Provider

 

interface for the MCP card

 

Three 50-pin Telco connector for DSL Loop interfaces

 

One 8-pin modular jack for a VT100 compatible terminal (serial)

 

￿connection

 

One 8-pin modular jack for the Alarm Relay Interface connection

 

 

Power

The Hotwire 8620 GranDSLAM chassis is available in an AC-powered

 

version and a DC-powered version.

 

The AC version can be connected to a DC source to provide power

 

redundancy. With the DC version, two separate DC sources may be

 

employed to provide power redundancy.

 

The AC version accepts AC power (100–240 V, nominal; 50–60 Hz) and

 

converts it to DC power. The maximum current draw is 4 amps, or

 

250 watts at 120 VAC.

 

The DC version operates from a DC 48 VDC power supply (48 V,

 

nominal). The maximum current draw is less than 5 amps at 42 VDC.

 

Both versions distribute 48 VDC power from the power source to

 

individual cards via the backplane.

 

 

 

* Technical Specifications subject to change without notification.

8620-A2-GN20-40

July 2003

B-1

Image 55
Contents Hotwire 8620 GranDSLAM Copyright 2003 Paradyne Corporation All rights reserved Important Safety Instructions United States EMI Notice CE Marking Japan July Contents Pinouts TroubleshootingTechnical Specifications Index CablingDocument Summary New Features for this ReleaseAbout This Guide Document Purpose and Intended AudienceDocument Number Document Title Product-Related DocumentsHotwire TDM Sdsl Termination Units, Models 8777 About This Guide July Introduction Hotwire 8620 GranDSLAMSCP card Hotwire 8620 GranDSLAM CardsDSL cards AC and DC Powered Models Hotwire 8620 GranDSLAM FeaturesHotwire 8620 GranDSLAM Components Introduction July Preinstallation Considerations InstallationCabling Unpacking the Hardware Package ContentsMounting Configurations Placing the 8620 Chassis on a Desktop or Table Hotwire 8620 GranDSLAM Chassis InstallationAttaching the Mounting Brackets Rack Mounting the 8620 ChassisNut Installing the 8620 Chassis in a RackConnection to the CO Ground Lug Complying with NebsESD Wrist Strap Jack Connecting Power Insert Power Source A’s Into Using a Single DC Power SourceInsert Power Source Into Using Two DC Power Sources for Power RedundancyUsing Only AC Power Source Insert Power Source B’s Into Using AC Power with DC Power BackupInstalling the Cards 03-17430 Alarms Verifying the InstallationMaking Cable Connections CablingEMI Notice Installing Network Tip and Ring ConnectionsConnecting a DSL Card Using Cable Ties Connecting a DSL Card Using Locking Pivot Brackets Connecting an SCP Card to a Terminal or PC Connecting an MCP Card to a Terminal or PC Connecting an SCP Card to an Snmp Management SystemConnecting to a Modem for Remote Management with MCP Connecting an MCP to an Snmp Management System Alarm Connecting CO Alarm to the Alarm SystemCabling July Troubleshooting Table TroubleshootingTroubleshooting Symptom Possible Cause Solutions For an SCP-card-based chassis LED is Indicating LEDsTroubleshooting July Pinouts Pin Modular Connector for Alarm Relay InterfacePin Number Use Pin Modular Serial SCM Connector Pin Modular LAN MCP/LAN SCM Slot ConnectorPin Number Use Direction Pin Number Function Pin Modular Serial MCP ConnectorSerial Interface Interface Pin Pin Number Use DB25 Adapter PinoutsDB9 Adapter Pinouts Pin ModularFor Slots Tip, Ring Pinouts July Dimensions Technical SpecificationsCooling ATM Adsl IndexIN-2
Related manuals
Manual 108 pages 7.87 Kb Manual 108 pages 33.36 Kb

Hotwire 8620 GranDSLAM Installation Guide, 8620 specifications

The Paradyne 8620 and Hotwire 8620 GranDSLAM are advanced DSLAM devices designed to provide high-speed broadband access over existing copper lines. This installation guide will outline the main features, technologies, and characteristics of these powerful units.

The Paradyne 8620 is engineered to support various DSL technologies, including ADSL, ADSL2+, and VDSL. This versatility allows operators to deploy services tailored to the needs of their customers, enabling data rates of up to 50 Mbps downstream, making it an ideal choice for meeting increasing bandwidth demands. The Hotwire 8620 GranDSLAM shares many similarities, focusing on providing enhanced service delivery for both residential and business users.

One of the key features of the GranDSLAM series is its modular architecture. Both models support up to 48 subscriber line interfaces in a single chassis, which provides significant scalability. Operators can seamlessly increase capacity by adding additional cards to accommodate growth. The devices are designed for easy deployment and management, equipped with an intuitive web-based interface that simplifies configuration and monitoring tasks.

Both units also feature advanced management capabilities, including support for SNMP and TR-069 protocols. This allows service providers to manage and provision devices remotely, significantly reducing operational costs and improving service reliability. The GranDSLAM models can also provide detailed diagnostic information, helping operators quickly identify and troubleshoot issues.

The Paradyne and Hotwire series ensure interoperability with various customer premises equipment, enabling service providers to offer bundled services such as voice, video, and data over the same connection. This capability is enhanced by the units’ ability to support VLANs and QoS features, ensuring that high-priority traffic receives the necessary bandwidth.

In addition to performance, the 8620 series is built with energy efficiency in mind. By utilizing power-saving features, these units help reduce overall operational costs while still providing reliable service.

Overall, the Paradyne 8620 and Hotwire 8620 GranDSLAM are robust solutions for service providers looking to deliver high-speed broadband services. Their modular design, advanced management capabilities, and support for multiple DSL technologies make them an excellent choice for today’s demanding telecommunications environment. With these advantages, operators can effectively meet customer needs while preparing for future growth and technology advancements.