PARAMETER | DEFAULT CONFIGURATION |
Gateway | 0.0.0.0 |
Inband Management | off |
Inband Management VLAN ID | 0 (off) |
IP Address: IPD12000 Slot 13 | 192.168.254.252 |
IP Address: IPD12000 Slot 14 | 192.168.254.253 |
IP Address: IPD4000 Slot 5 | 192.168.254.252 |
Management IP Address Filter Range | 0.0.0.0 - 255.255.255.255 (all) |
Subnet Mask | 255.255.255.0 |
3.2SAM2000G Port Parameters
PARAMETER | DEFAULT CONFIGURATION |
Circuit Identification | n/a (no default) |
0 (off) | |
Flood | uplink |
IP Range 1 | 0.0.0.0 - 255.255.255.255 (all) |
IP Range 2 | 0.0.0.0 - 0.0.0.0 |
Priority (VLAN) | 0 (none) |
Protocol | all |
Speed | 272 kbps |
VLAN Range | 0 - 0 (off) |
4.0SAM2000G MANAGEMENT
Once your SAM2000G has been installed, bandwidth and other configurations are software selectable via your IP DSLAM's MUM. Dependent upon the MUM model installed, the SAM2000G may be configured via Command Line Interface (CLI), Simple Network Management Protocol (SNMP) and/or Net to Net Technologies'
If your IP DSLAM is newly installed, configuration of the DSLAM's IP Address, Subnet Mask and Gateway must be completed, via CLI or NMS, before you will be able to access management data or configure any other parameters. Refer to the CLI Management User Guide (http://www.nettonet.com/support/docs/210- 0000052) or to the NMS Management User Guide (http://www.nettonet.com/support/docs/210-
0000048) for initial configuration instructions.