Paradyne 6210, 6381, 6211 manual LAN clients, Bridge Filters

Page 35

Hotwire 6210, 6211, and 6381 User’s Guide

2.Under Advanced, select Access Control. The Access Control screen appears. All Access Control rules have precedence over rules that were added via the port-forwarding page.

The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.

4.6.4LAN clients

To add a LAN client:

1.From the Home screen, click Advanced.

2.Under Advanced, select LAN Clients. If DHCP is used, all DHCP clients are automatically assigned. If a fixed IP address server is on the LAN and you want this server to be visible via the WAN, you must add its IP address. Once the IP address has been added to you can apply Port Forwarding rules to this IP address.

The apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.

4.6.5Bridge Filters

The bridge filtering mechanism provides a way for the users to define rules to allow or deny frames through the bridge based on source MAC address, destination MAC address and/or frame type. When bridge filtering is enabled, each frame is examined against the defined filter rules sequentially, and when a matched is determined, the appropriate filtering action (allow or deny) is performed. The bridge filter will only examine frames from interfaces which are part of the bridge itself. Twenty filter rules are supported with bridge filtering.

To enable Bridge Filters:

1.From the Home screen, click on Advanced.

2.Under Advanced, select Bridge Filters. Figure 4-15 illustrates a typical Bridge filter configuration.

The User Interface for Bridge Filter allows the user to add, edit, and delete, as well as enable the filter rules. To add rules, define the source MAC address, destination MAC address, and frame type with the desired filtering action (allow or deny), and click on the Add button. The MAC address must be in a xx-xx-xx-xx-xx-xx format, with 00-00- 00-00-00-00 or blanks meaning any address.

To edit or modify an existing filter rule, select the desired rule created previously in the Edit select box. The selected filter rule appears in the top section, as with the Add procedure. Make the desired change to the MAC address, frame type and access type, and click on Apply.

To delete a filter rules, select the filter rule entry to delete in the Delete selection box. Note that multiple deletions are possible. Once all the desired filter rules are selected for deletion, click on the Apply button. The Select All select box can also be used to delete the entire filter rule. It provides a quick method of selecting all filter rules for deletion.

The Enable Bridge Filters button allows you to enable or disable bridge filtering. It can be set or unset during any add, edit, or delete operation. It can also be set or unset independently by pressing the Apply button.

6210-A2-GB21-00

April 2004

35

Image 35
Contents Hotwire 6210, 6211, Copyright 2004 Paradyne Corporation All rights reserved CE Marking FCC Part 15 Declaration Supplier’s Declaration of Conformity Canada EMI Notice Table of Contents Using the Web InterfaceModels Features & System RequirementsIntroduction Ports and buttons Back panel Your Modem at a GlancePacking List LED description Front panelGetting Started Connecting the HardwareTurn on Your PC Cable ConnectionsWindows USB Driver Installation Configuring Your PCNew Hardware Installation Options Windows XP Hardware InstallationNetwork Connections in Windows XP TCP/IP Properties in Windows XP WindowsWindows 95 Windows MeWindows NT Assigning IP to your PC automatically by Dhcp Log Into Your Modem Using the Web InterfaceHome Home screenSaving Changes SetupWide Area Network connection Local Area Network connectionNew Connection Configuring the WANBridged Connection Setup PPPoA Connection Setup PPPoE Connection Setup Dhcp Connection Setup Static IP Connection Setup Modify an Existing Connection Configuring the LANModem Setup Enable/Disable Dhcp10. Dhcp Server Configuration Changing the Modem’s IP address Firewall/NAT ServicesUpnP AdvancedPort Forwarding Access ControlBridge Filters LAN clients15. Bridge Filters Multicast/IGMP Snooping16. Multicast 18 illustrates a typical Static Route Static RoutingDynamic Routing ToolsUser Management System CommandsRemote Log Ping Test Update GatewayStatus System Log Product InformationLEDs blink in a sequential pattern TroubleshootingModem is not functional Can’t connect to the modemDSL Link LED is always off Terminology What is a firewall?

6210, 6211, 6381 specifications

Paradyne's family of products, particularly the 6381, 6211, and 6210 models, has made significant strides in the networking and telecommunications domain. These devices cater to a wide array of connectivity needs, offering robust solutions for both residential and commercial applications.

The Paradyne 6381 is known for its advanced DSL modem capabilities. Supporting high-speed data transmission over copper lines, it has become a reliable choice for Internet Service Providers looking to deliver stable and fast Internet services. One of its main features is its ability to aggregate multiple DSL connections, which enhances bandwidth and ensures a steady user experience, even during peak times. Its built-in diagnostic tools allow for efficient troubleshooting, making it easier for technicians to maintain and optimize network performance.

The 6211 model presents an interesting option for network managers with its multifunctional capabilities. It is designed to facilitate both voice and data over a single connection, leveraging Voice over IP (VoIP) technology. This integration simplifies network infrastructure, reducing overhead costs while maintaining service quality. The 6211 also supports Quality of Service (QoS) protocols, ensuring that voice traffic is prioritized, which results in clearer call quality and less disruption.

On the other hand, the Paradyne 6210 stands out for its versatility and compact design. This model is particularly well-suited for small to medium-sized businesses looking for a cost-effective solution without compromising on performance. It offers multiple Ethernet ports, enabling easy connection of various devices and seamless network expansion. The 6210 also features built-in security protocols to protect against unauthorized access, making it a secure option in today’s ever-evolving threat landscape.

All three models utilize advanced communication technologies, including the latest ADSL and VDSL standards, ensuring compatibility with existing infrastructure while providing the ability to scale up as needs grow. They also incorporate user-friendly interfaces for easier management, with support for remote configuration and monitoring, allowing network administrators to manage settings without being physically present.

In summary, Paradyne's 6381, 6211, and 6210 models are distinguished by their advanced features, reliability, and versatility. Each device caters to specific market needs, ensuring users can find a tailored solution for their networking challenges. These products embody Paradyne's commitment to delivering high-quality communication technology that keeps pace with the demands of modern connectivity.