Paradyne 6381, 6211, 6210 manual Tools, Dynamic Routing

Page 39

Hotwire 6210, 6211, and 6381 User’s Guide

4.6.8Dynamic Routing

Dynamic Routing allows the CPE to automatically adjust to physical changes in the network. The CPE, using the RIP protocol, determines the network packets’ route based on the fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the network.

To enable Dynamic Routing:

1.From the Home screen, click on Advanced.

2.Under Advanced, select Dynamic Routing.

3.Specify the Protocol. The protocol is dependent upon the entire network. Most networks support Rip v1. If RIP v1 is selected, routing data will be sent in RIP v1 format. If Rip V2 is selected, routing data will be sent in RIP v2 format using subnet broadcasting. If Rip V1 Compatible is selected, routing data will be sent in RIP v2 format using multicasting.

4.Specify the Direction. This determines the direction that RIP routes will be updated. Selecting In means that the CPE will only incorporate received RIP information. Selecting Out means that the CPE will only send out RIP information. Selecting both means that the CPE will incorporate received RIP information and send out updated RIP information.

Figure 4-19 illustrates a typical Dynamic Route.

Figure 4-19. Dynamic Routing

The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of the page) and select System Commands. At the System Commands page, click on Save All.

4.7Tools

Your modem supports a host of customization and debugging tools.

6210-A2-GB21-00

April 2004

39

Image 39
Contents Hotwire 6210, 6211, Copyright 2004 Paradyne Corporation All rights reserved CE Marking FCC Part 15 Declaration Supplier’s Declaration of Conformity Canada EMI Notice Table of Contents Using the Web InterfaceFeatures & System Requirements IntroductionModels Ports and buttons Back panel Your Modem at a GlancePacking List LED description Front panelGetting Started Connecting the HardwareTurn on Your PC Cable ConnectionsWindows USB Driver Installation Configuring Your PCNew Hardware Installation Options Windows XP Hardware InstallationNetwork Connections in Windows XP TCP/IP Properties in Windows XP WindowsWindows 95 Windows MeWindows NT Assigning IP to your PC automatically by Dhcp Log Into Your Modem Using the Web InterfaceHome Home screenSaving Changes SetupWide Area Network connection Local Area Network connectionNew Connection Configuring the WANBridged Connection Setup PPPoA Connection Setup PPPoE Connection Setup Dhcp Connection Setup Static IP Connection Setup Modify an Existing Connection Configuring the LANModem Setup Enable/Disable Dhcp10. Dhcp Server Configuration Changing the Modem’s IP address Firewall/NAT ServicesUpnP AdvancedPort Forwarding Access ControlBridge Filters LAN clients15. Bridge Filters Multicast/IGMP Snooping16. Multicast 18 illustrates a typical Static Route Static RoutingDynamic Routing ToolsSystem Commands Remote LogUser Management Ping Test Update GatewayStatus System Log Product InformationLEDs blink in a sequential pattern TroubleshootingModem is not functional Can’t connect to the modemDSL Link LED is always off Terminology What is a firewall?

6210, 6211, 6381 specifications

Paradyne's family of products, particularly the 6381, 6211, and 6210 models, has made significant strides in the networking and telecommunications domain. These devices cater to a wide array of connectivity needs, offering robust solutions for both residential and commercial applications.

The Paradyne 6381 is known for its advanced DSL modem capabilities. Supporting high-speed data transmission over copper lines, it has become a reliable choice for Internet Service Providers looking to deliver stable and fast Internet services. One of its main features is its ability to aggregate multiple DSL connections, which enhances bandwidth and ensures a steady user experience, even during peak times. Its built-in diagnostic tools allow for efficient troubleshooting, making it easier for technicians to maintain and optimize network performance.

The 6211 model presents an interesting option for network managers with its multifunctional capabilities. It is designed to facilitate both voice and data over a single connection, leveraging Voice over IP (VoIP) technology. This integration simplifies network infrastructure, reducing overhead costs while maintaining service quality. The 6211 also supports Quality of Service (QoS) protocols, ensuring that voice traffic is prioritized, which results in clearer call quality and less disruption.

On the other hand, the Paradyne 6210 stands out for its versatility and compact design. This model is particularly well-suited for small to medium-sized businesses looking for a cost-effective solution without compromising on performance. It offers multiple Ethernet ports, enabling easy connection of various devices and seamless network expansion. The 6210 also features built-in security protocols to protect against unauthorized access, making it a secure option in today’s ever-evolving threat landscape.

All three models utilize advanced communication technologies, including the latest ADSL and VDSL standards, ensuring compatibility with existing infrastructure while providing the ability to scale up as needs grow. They also incorporate user-friendly interfaces for easier management, with support for remote configuration and monitoring, allowing network administrators to manage settings without being physically present.

In summary, Paradyne's 6381, 6211, and 6210 models are distinguished by their advanced features, reliability, and versatility. Each device caters to specific market needs, ensuring users can find a tailored solution for their networking challenges. These products embody Paradyne's commitment to delivering high-quality communication technology that keeps pace with the demands of modern connectivity.