Haier SAP-K18AM Operation Of Wireless Remote Control Unit, Remote Control Unit Functions, Display

Operation and Maintenance

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.2 Remote Control Unit (Functions)

Signal Transmitter

Display

ON/OFF operation button			MODE operation button	EG
TEMP. setting button			TEMP button
FAN SPEED Selector button			SWING button
CLOCK button			TIMER ON button
BLOW button			TIMER OFF button
TURBO button			LIGHT button
SLEEP button
Transmitter	When you press the buttons on the remote control unit, the OPER
	mark appears in the display to transmit the setting changes to
	the receiver in the air conditioner.
Display	Information on the operating conditions is displayed while the
	remote control unit is switched on. If the unit is turned off, only
	CLOCK and TEMP was displayed.
ON/OFF operation	This button is for turning the air conditioner ON and OFF.
MODE selector button To select “AUTO” “COOL”, “DRY” “FAN” or “HEAT” mode.
(AUTO)		: When choosed this setting, the air conditioner calculates
		thedifference between the thermostat setting and the room
		temperature and automatically switches to the “COOL” or
		“HEAT” mode as appropriate.
(COOL)		: The air conditioner makes the room cooler.
(DRY)		: The air conditioner reduces the humidity in the room.
(FAN)		: The air conditioner run the indoor fan only.
(HEAT)		: The air conditioner makes the room warmer.
(+) / (-) setting		+ : Press the (+) button to increase set temperature, continue
buttons		press 2 seconds for fast increasing set temperature.

-: Press the (-) button to reduce set temperature, continue press 2 seconds for fast reducing set temperature.

LOCK / UNLOCK	: Press the - + button at the same time to lock or unlock
button	wireless remote controller.
TIMER ON button	: The air conditioner starts at the set time.
TIMER OFF button	: The air conditioner stops at the set time.

8