Operation and Maintenance
5.CLEAN AND CARE
5.2Cleaning the Air Filters (Continued)
1. Take Down the Air Filters
Pull out the panel to an angle at botttom grooves on panel. And, pull the air filter upward then downward to take it off. (Fig. 7).
2. Cleaning | Fig.7 | ||
To clean the dust adhering to the filters, you can | |||
| |||
either use a vacuum cleaner, or wash them with | air filter | ||
warm | water (the water with the neutral detergent | ||
| |||
should below 45 oC) when the filters are very dirty |
| ||
(such asoil stain), and dry it in the shade. (Fig.8a) |
| ||
NOTE | Don't use hot water which temperature |
| |
| is above 45°C to prevent fade or | Fig.8a | |
| deformation. | ||
Don't dry it on fire for filter, it would catch a fire or deformation.
3.Put On Silver Ion Filters (*SAP-K18AMS only)
Put on silver Ion filters, make the side of filter with net facing you, then cover the surface panel well. (Fig. 9)
NOTE 1. In general, the silver Ion filters should be replaced once every three months.
2.Dirty silver Ion filters can not be washed and reused. Purchase a replacement filter at your local dealer. (Fig. 8b)
5.3Check Before You Use
1.Be sure that nothing obstructs the air outlet and intake vents. (Fig.10)
2.Check that whether ground wire is properly connected or not.
3.Check that whether the batteries of air conditioner are changed or not.
4.Check that whether installation stand of the outdoor unit is damaged or not. If damaged, please contact the dealer.
Back side
air filter 
*Silver Ion filter
Fig.8b
Fig.9
5.4 Maintain After Use
1. Turn main power off.
2. Clean the filter, indoor and outdoor units' bodies.
3. Clear dust and obstructions from the outdoor unit.
4. Repaint the rubiginous place on the outdoor unit to
prevent it from spreading.
Fig.10
17
