Radiant Module–Glass Ceramic Cooktop Cleaning
Cleaning of glass ceramic cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass ceramic cooktop follow these basic steps.
Before using your module for the first time, clean
it with the recommended cleaning creme. This helps protect the top and makes
DAILY CLEANING: Use only the recommended cleaning creme on Glass Ceramic.
For normal, light soil:
1.Rub a few drops (less is better) of the recommended cleaning creme onto the soiled area using a damp paper towel. Wipe until all soil and creme are removed. Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.
2.Clean the surface with the recommended cleaning creme after each use.
For heavy, burned-on soil:
1.Apply a few drops of the recommended cleaning creme to the (cool) soiled area.
2.Using a damp paper towel, rub creme into the
3.Carefully scrape remaining soil with the razor scraper. Hold the scraper at a 30° angle against the ceramic surface.
4.If any soil remains, repeat the steps listed above. For additional protection, after all soil has been removed, polish the entire surface with the recommended cleaning creme.
5.Buff with a dry paper towel.
NOTE:
•Using a razor scraper will not damage the surface if the 30° angle is maintained.
•Be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade.
•Store the razor scraper out of reach of children.
Special Care:
Sugary spillovers (such as jellies, fudge, candy syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Follow these instructions carefully and remove the soil while the spill is still hot.
1.Turn off all the surface units affected by the spillover. Remove hot pans.
2. Wearing an oven mitt, hold the razor 
scraper at a 30° angle to the cooktop 
and scrape the hot spill to a cool area 
outside the surface unit.
3.With the spill in a cool area, use a dry paper towel to remove any excess. Any spillover remaining should be left until the surface of the module has cooled.
Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under heavy,
General Information:
As the recommended cleaning creme cleans, it leaves a protective coating on the cooktop surface. This coating helps to prevent
To conveniently order more creme and/or scrapers for cleaning your radiant range,
please call our toll free number: |
|
National Parts Center | |
Creme 10 oz. | # WB02X8273 |
Scraper | # WX5X1614 |
Creme and Scraper Kit | # WB64X5027 |
Care and Cleaning
PRECAUTIONS
•Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the recommended cleaning creme for proper cleaning and protection of your glass ceramic surface.
•If you slide aluminum or copper cookware across the surface of your cooktop, they may leave metal markings which appear as scratches. If this should happen, use the razor scraper and cleaning creme to remove these markings. Failure to remove these residues immediately may leave permanent marks.
•Water stains (mineral deposits) are removable using the recommended cleaning creme or full strength white vinegar.
•If pots with a thin overlay of aluminum, copper, or enamel are allowed to boil dry, the overlay may bond with the glass ceramic and leave a black discoloration. This should be removed immediately before heating again or the discoloration may be permanent.
•Use of window cleaner may leave an iridescent film on the cooktop. The recommended cleaning creme will remove this discoloration.
Read and follow all instructions and warnings on the recommended cleaning creme label.
27
