Operation and Maintenance
4.OPERATION OF WIRELESS REMOTE CONTROL UNIT
4.3Using the General Operation
STEP 1
STEP 3
STEP 4
STEP 2
STEP 5
NOTE Press the setting buttons as described below and change the settings as desired.
STEP 1 To start the air conditioner, press the ON/OFF operation button. | ||||
|
|
| ||
STEP 2 Press the MODE selector button and select the desired mode. | ||||
|
| For DRY operation | → |
|
|
| For COOLING operation → |
| |
|
| For FAN only operation | → |
|
|
| For AUTO operation | → |
|
|
| For HEATING operation | → | (Only for Heat Pump Model) |
|
|
| ||
STEP 3 Press the TEMP. setting buttons to change the temperature setting | ||||
|
| to the desired temperature. |
| |
|
| Adjustable temperature range: |
| |
|
| 30 °C (86 °F) | ||
|
| Under “AUTO” operation, the temperature can not be adjust. | ||
|
| Under “HEAT” operation, the initial value is 28 °C (82 °F); | ||
|
| Under other operation, the initial value is 25 °C (77 °F). | ||
|
|
| ||
STEP 4 Set the FAN SPEED selector button to the setting you want. | ||||
|
| A UTO : Auto fan speed. |
| |
|
| : Low fan speed. |
|
|
|
| : Middle fan speed. |
| |
|
| : High fan speed. |
| |
|
| Under Dry mode, the fan speed is automatically set to LOW. | ||
| NOTE | |||
STEP 5 Press the 
button and set the air blow direction as desired or automatically.
To STOP the air conditioner, press the ON/OFF operation button again.
10
