MAINTENANCE
The KARIK and NUMERIK are designed for long life. To reinforce our commitment to customer satisfaction and extended product life, we have included in the design of the KARIK a DIAGNOSTIC OUTPUT CONNECTOR for ease of maintenance. We recommend that you contact your dealer approximately two years after purchase, to arrange for a free diagnostic check on your KARIK.
CLEANING Dust or finger marks can be removed using a soft, slightly damp cloth. Avoid the use of domestic cleaning fluids.
WARNING Disconnect the mains supply first.
FUSE If the fuse in the mains inlet connector should blow, replace it with the correct type only. To replace the fuse, first switch off and disconnect the mains lead. Open the fuse drawer on the mains inlet connector by grasping either side of the drawer front and pulling outwards. The drawer has two compartments, the inner one contains the active fuse and the outer one contains a spare fuse. Remove the blown fuse by poking it out from the under side of the drawer using a small screwdriver or the end of a pen. Insert the spare fuse into the inner compartment and close the drawer.
If the new fuse blows then there may be a fault and the complete unit should be returned to your Linn dealer.
18
