Linn CD Playback System owner manual Repeat, Digital Audio Output

When searching backwards and the start of the first track is reached, the disc will start to play automatically.

If in TRACK display mode, the display will increment when the button is held past a track boundary. If in TIME display mode, the display will increment or decrement depending on the time mode selection.

REPEAT

To repeat all tracks, or selected sections of the disc, press REPEAT . To repeat the complete disc at any time during play, press REPEAT . The REPEAT legend will light.

To cancel disc repeat, and resume normal play, press REPEAT a further two times.

Play between two points can be repeated by selecting the start point using SKIP, SEARCH or INDEX. Press REPEAT to store the start point. The REPEAT legend will light. Select the end of the repeat section using SKIP, SEARCH or INDEX. Again press REPEAT to store the end point. NOTE Do not press REPEAT too quickly but allow time for the KARIK to return to play mode.

This passage will be repeated continually from the start point. To cancel repeat, press REPEAT again while in this mode; normal play will proceed.

If in TRACK display mode, the track numbers between the start and end points will be shown. The TRACK and INDEX legends will be lit. When in TIME display mode, the time display will increment or decrement depending on the time mode selection.

DIGITAL AUDIO OUTPUT

To switch the digital audio output on and off, press DIGITAL . Digital output is enabled at power-up and the DIGITAL legend is lit. When the KARIK is connected to CHANNEL 1 on a NUMERIK, the DIGITAL button acts as an input selector for the NUMERIK.

DIGITAL OUTPUT ‘ON’ - KARIK selected on NUMERIK.

DIGITAL OUTPUT ‘OFF’ - Channel 2 (eg. DAT) selected on NUMERIK.

13